Mech-fiber™ 300 Mixer
Standard Dimensions
Height: 2685mm (105.5”)
Width: 2439mm (96”)
Payload: 4,200kg
Horse Power: 80
Mech-fiber™ 300 Baleblend™
Height: 2785mm (109.5”)
Width: 2439mm (96”)
Payload: 4,200kg
Min. Horse Power: 80
Machines can be built to individual order and dimensions customised for a variety of farm set-ups.
The Mech-fiber™ 300 is specifically designed for farms with buildings offering limited access for a conventional sized mixer.
With a payload of 4,200 kgs, the Mech-fiber™ 300 has greater manoeuvrability and employs the revolutionary new three-point chassis system. As an added bonus it can also be fitted with a rear (side-to-side) feed-out system. - Smaller mixer but larger capacity
- Lower power, torque and fuel requirements
- New three-point chassis improving stability
- Two-chain drive system
- Automatic Oiler
- Baleblend Big Bale processing
 | Smaller mixer but larger capacity
The new improved design gives greater capacity in a compact machine and is fitted with the new ‘stepped-in-paddle-legs’ design giving a cleaner tumbling action. The Mech-fiber™ 300
still maintains the unique twin chamber design, separated by the well proven guillotine door assembly to facilitate rapid feed-out.
Lower power, torque and fuel requirements
A typical power unit to tow a loaded Mech-fiber™ 300 would be an 80 HP tractor. The mixer when loaded generally requires approximately half this power, resulting in a dramatic saving on
overall fuel consumption by the tractor compared with other mixers, despite a larger capacity and faster discharge rate.
New three-point chassis improving stability
A new three point ‘T’ chassis is fitted with heavy-duty weigh bars which are positioned directly onto the rear axle and to the front drawbar to reduce any potential flexing in the body, thus maintaining the all important weighing accuracy. This all provides for a much lower and more manoeuvrable unit where access is limited.
Two-chain drive system
The tough two chain drive line on the Mech-fiber™ 300 is Keenan’s time-tested design utilising an independent idler shaft to reduce any stress within the discharge auger drive
sprockets, while allowing it to be driven at the required speed for fast feed-out rates.
Automatic oiler
An automatic oiling system can be fitted and is operated by the hydraulic rams opening and closing the guillotine door. This delivers ‘pulses’ of oil to the drive chains, lubricating them to
the optimum levels for safety and improved chain life.
Baleblend™ Big Bale processing
The Mech-fiber™ 300 can be supplied with the latest Baleblend™ bale chopping technology. Big round or square bales of forage placed directly on the machine’s top cradle are chopped and incorporated into the ration in a matter of minutes.
|
